贵州矿山机械

新闻分类

产品分类

联系我们

澳门电子游戏网站

地址:贵阳市白云区尖坡村(尖坡幼儿园旁)

手机:13984832596   蒋兴礼(董事长)

         13985194326    兰秀蓉(厂长)

         18085014030    蒋龙燕(负责人)

座机:0851-84416815

网址:www.sikusawath.com


贵州铸铁厂的管道安装的方式

您的当前位置: 首 页 >> 新闻中心 >> 行业动态

贵州铸铁厂的管道安装的方式

发布日期:2018-02-08 作者:贵州铸铁厂 点击:

贵州铸铁厂的管道安装的方式

贵州铸铁厂

The way of pipeline installation in Guizhou cast iron plant


贵州铸铁厂的管道安装的方式介绍如下:

The installation of the pipeline in Guizhou cast iron plant is introduced as follows:


虽然贵州铸铁和普通铸铁里都含有石墨单体,但是贵州铸铁中的石墨是呈球状的,因此会有很高的强度。这也是为什么我们要选择球墨铸铁管应用的原因,但是安装过程和清洁度的要求是比较高的。

Although both Guizhou iron and ordinary cast iron contain graphite monomers, the graphite in the Guizhou cast iron is spherical, so it will have very high strength. This is why we have to choose the reasons for the application of the ductile cast iron pipe, but the requirements for the installation process and cleanliness are relatively high.


贵州铸铁管的清洁程度会直接影响到安装效果,从而影响到期使用性能的发挥,因此在安装使用之前要对其进行彻底的清洗。但是清洗、安装球墨铸铁管也是要讲究一定方式方法的。

The cleanliness of Guizhou cast iron pipe will directly affect the installation effect, thereby affecting the performance of the due performance. Therefore, we must thoroughly clean it before installation and use. But the cleaning and installation of the ductile cast iron pipe should also be paid attention to a certain method.


首先将贵阳铸铁管承口内的所有杂物都清除擦洗干净,然后还要将其胶圈上的粘着物清擦干净,接着把胶圈弯装入承口槽内并按压结石,确保胶圈各个部分均匀地卡在槽内。

First, remove all the impurities in the cast iron pipe socket of Guiyang, then clean the adhesive on the apron, then load the rubber ring into the socket and press the stone to ensure that all parts of the apron are evenly clamped in the slot.


其次,对安装好的各个部分均匀的涂刷上润滑剂,采用人工下管法或机械下管法将贵阳铸铁管进行下管。在这过程中,要注意的是不要将已清理的管子部位再次污染,那么之前的操作就白费了。

Secondly, the Guiyang cast iron pipe is carried out by artificial tube method or mechanical tube method. In this process, it is important to be careful not to pollute the cleaned pipe parts again, so the previous operation is in vain.


相关标签:贵州铸铁厂

最近浏览:

相关产品:

相关新闻:

贵公网安备 52011302004321号

在线客服
分享
澳门电子游戏网站